GVP (Great Valley Products): A530 |
Connection: Seitlicher Expansion Slot |
GVP A530, front
GVP A530, back
Hi Res Version, GVP A530, front - bytes
A530 full MMU (by user) - bytes
Image of GVP A530 motherboard, front. - bytes
Image of GVP A530 motherboard, back - bytes
Hi Res Version, GVP A530, back - bytes
- bytes
GVP A530 without cover, front - bytes
Image of another GVP 530 unit - bytes
GVP A530 without cover, back - bytes
Image of the GVP 530 interior - bytes
Image of the GVP 530 286 connector - bytes
Processor: | EC030@40Mhz, 030@40Mhz or 030@50Mhz |
FPU: | Optional 68882 (PGA) at the same frequency as the processor. |
MMU: | None in EC030 version, Internal in other versions. |
Max Ram: | 8MB |
Ram Type: | 2 x 64pin GVP SIMM slots. |
The GVP A530 contains two GVP 64pin SIMM slots but please note that GVP 64pin SIMMs are not necessarily the same, or compatible with several other 64pin SIMM formats that exist. When adding RAM to the GVP A530 you can use either 1MB SIMMs or 4MB SIMMs, but you cannot mix them. The GVP A530 also has a built in SCSI controller, providing an internal 50pin SCSI connector and an external DB25 SCSI connector. A hard drive can also be physically mounted inside the case. The GVP 530 also has a connector for attaching an optional 286 PC emulator.
Jumper Settings
Jumper | Open | Closed |
---|---|---|
J1 | MMU Enabled (Default) | MMU Disabled |
J2 | Turbo Mode Off | Turbo Mode On |
J3 | Cache Enabled (Default) | Cache Disabled |
J4 | Reserved | Reserved (Default) |
J5 | Reserved (Default) | Reserved |
J6 | Reserved | Reserved (Default) |
J7 | Reserved (Default) | Reserved |
J8 | SCSI ROM | N/A |
J9 | Auto Boot Disabled | Auto Boot Enabled (default) |
J10 | Reserved (Default) | Reserved |
J11 | RAM Installed (Default) | No RAM Installed |
J12 | Reserved (Default) | Reserved |
J13 | 1MB SIMMs installed (Default) | 4MB SIMMs installed |
CN14 | For Fan Connection ONLY | DO NOT SHORT |
CN16 | Reserved (Default) | Reserved |
Jumper | Pins1&2 shorted | Pins2&3 shorted |
---|---|---|
CN7 | Reserved (Default) | Reserved |
CN8 | Reserved | Reserved (Default) |
CN11 | Reserved | Reserved (Default) |
CN18 | Reserved (Default) | Reserved |
For GVP A530's, the MMU Jumper (J1) should be set to enabled for full 030's and disabled for EC030s.
Contributions to this page by: Chris - CLS2086, Gary Bliter, Granada, Greg Scott (National Amiga), Jan Pedersen, RiWa & Friends |
Einem link gefolgt? Hier gehts zur Hauptseite
Followed a link? Please go to the Main Site