XPert: Merlin
Connection: Zorro Auto Sensing

Rev 3.1 Merlin
Rev 3.1 Merlin

Hi Res Version, Rev 3.1 Merlin - bytes

Chipset(s) Tseng Labs ET4000W32p
Graphics Memory 2MB or
8bit Support: Yes
16bit Support: Yes
24bit Support: Yes
Display Drivers
CyberGraphX V2: No
CyberGraphX V3: No
CyberGraphX V4: No
Picasso 96: Yes
EGS: Yes
Other: Yes

The Merlin is a Zorro II and III auto-sensing graphics card. It has a pixel clock of 130Mhz (8bit), 65Mhz (16bit), 43Mhz (24bit). The card also has an RGB IN socket (VGA type) which feeds an auto-switcher on the board. It has no scandoubling abilities but if the native screens are fed into a scandoubler, then into this connector, the Amiga's native graphics modes can be displayed through the card. There is a feature connector header on the Merlin to accomodate a video digitiser module made by Xpert called the Merlin X-Calibur. No matter how much ram is on the board only 2MB can be used in Zorro II mode. Please note that to get this board to work in the Zorro IV busboard for the A1200 you may need to change a jumper - "For Apollo 1240 accelerator card config 0 jumper should be closed, other ZIV jumpers should be opened."

The card also has an SVHS OUT and FBAS OUT. The board contains what appears to be 2 x 72pin SIMM slots for adding additional graphics memory. The 72pin SIMMs are not standard PS/2 SIMMs as used by most accelerators, but use a different control logic. It supports 1 x 2MB 32bit SIMMS, 1 x 4MB 32bit SIMMs or 2 x 2MB 16bit SIMMs for a maximum of 4MB of RAM. If you experience many bugs using the Merlin such as garbage when dragging the screen or using the menus, you may require a hardware update. Likewise, your Merlin may not be compatible with the 060 in which case you'll need the hardware update also, which is apparently still available from the original developer, see below. An FAQ written by the designer of the card, can be found Contributions to this page by:
Christian Reininger, Pawel Chwalowski, RiWa & Friends, Vaughn Atkinson

Einem link gefolgt? Hier gehts zur Hauptseite

Followed a link? Please go to the Main Site