Rev 4.0, Front
| Micronik: Z-2i |
| Connection: Trapdoor Slot (A1200) |
Rev 4.0, Front
Rev 4.0, Back
Rev 4.02, Front
Rev 4.02, Back
Rev 5.02, Front
Rev 5.02, Back
Hi Res Version, Rev 4.0 Front - bytes
Hi Res Version, Rev 4.0 Back - bytes
Hi Res Version, Rev 4.02 Front - bytes
Hi Res Version, Rev 4.02 Back - bytes
Hi Res Version, Rev 5.02 Front - bytes
Hi Res Version, Rev 5.02 Back - bytes
Image of the Video Slot Enabler - bytes
Image of adaptor - bytes
Keyboard Adaptor, connector closeup - bytes
Keyboard Adaptor, complete cable - bytes
| Zorro II: | 5 | |
| Zorro III: | None | |
| ISA: | 3 or 4 x 16bit (3 inline) | (Non Active) |
| PCI: | None | |
| Video Slots: | None or 1 (inline) | (AGA Type) |
| Other: | A1200 style trapdoor connector |
A busboard designed for A1200's towered with an appropriate tower kit such as the Micronik Infinitiv. Depending on the version of the board it may also have a combination of PCMCIA connector, 72pin SIMM slots, video slot and integrated keyboard adaptor. Not all versions of this busboard have those features. To use the Video Slot may require the use of the video slot enabler. It clips over the top of various chips on the A1200 motherboard, at the following locations, U30, U7, U8. In order to use an accelerator card with this busboard, the turbo jumper must be closed.
| LOCATION | NUMBER OF PINS | LABELING |
| Upper Left (REV 4.02 and REV5.02) |
2 Pins | GND * +12V |
| Upper Left (REV4.02 only) |
4+1 Pins | Keyboard Cable Connector (Don't know for what cable.) |
| Above the Power Connector |
REV4.02: 2+5 Pins REV5.02: 2+2 Pins |
unused * RESET1 - RESET1 * unused * unused * TURBO2 * TURBO2 RESET1 * RESET1 - TURBO2 * TURBO2 |
| Power Connector (REV 4.02 and REV5.02) |
8 Pins | GND * GND * GND * +5V * +5V * -5V * +12V * -12V |
| Contributions to this page by: Andreas Kähler, Christian, Martina Jacobs, Michael Grünseich, Pascal Rielland, Peter Olsson |
Einem link gefolgt? Hier gehts zur Hauptseite
Followed a link? Please go to the Main Site
