ACT Elektronik Vertriebs GmbH: Apollo 1260
Wizard Developments: Magnum 1260
Anschluss: Trapdoor Slot (A1200)


Apollo1260, Vorderseite, 50MHz Version


Apollo1260, Rueckseite, 50MHz Version


Apollo1260 75MHz-Version Vorderseite


Apollo1260 75MHz-Version Rueckseite

HiRes Version Apollo1260, Vorderseite - bytes
HiRes Version Apollo1260, Rueckseite - bytes
HiRes Version Apollo 1260 75MHz-Version Vorderseite - bytes
HiRes Version Apollo1260 75MHz-Version Rueckseite - bytes
Hi Res Version, Power Converter Front - bytes
Hi Res Version, Power Converter Rear - bytes
Apollo1260 mit SCSI-Modul - bytes
Apollo1260 mit SCSI-Modul und Kabeln - bytes

Prozessor: 060@50Mhz, 060@66Mhz oder LC060@75Mhz
FPU: Keine im LC060, Intern in vollwertigem 060.
MMU: Intern
Max Ram: 32MB (64MB mit zusaetzlichem SIMM Sockel)
Ram Type: 1 x 72pin SIMM socket. (An additional SIMM slot can be fitted), (EDO RAM works but is not taken advantage of)

An accelerator which plugs into the trapdoor slot of the A1200. It has a battery backed up clock and is PCMCIA friendly. An optional SCSI-II controller was available for this card. An additional SIMM socket could be fitted by the dealer, or the end user if they were competent enough. The 66Mhz version of this card uses a 50Mhz 060 which has been overclocked by the manufacturer. Note, the Magnum 1260 is likely to be a rebadged version of this card. The Apollo 1260 is really the same card as the Apollo 1240 except that its been fitted with a power converter because the 060 is 3.3V and the 040 is 5V.

Jumpers

Jumper OFF ON
RAM Turn off RAM Turn on RAM
SCSI Disable SCSI Autoboot Enable SCSI Autoboot
Processor 040 Installed 060 Installed

SCSI Jumper

The SCSI interfaces autoboot option should be turned off if there are no bootable devices or any devices at all attached to the SCSI bus. This prevents a 30 second delay while the system attempts to detect bootable SCSI devices. It is possible to upgrade this card to an 060 with an appropriate voltage regulator.

CLK Jumper

Processor Position
040 @ any Mhz Set to 040
060@50Mhz Set to 060
060@66Mhz Set to 040

Einsendungen zu dieser Seite von:
Dalibor Matos, Kevin, Takahasi Kasiko

Einem link gefolgt? Hier gehts zur Hauptseite

Followed a link? Please go to the Main Site