ACT Elektronik Vertriebs GmbH: Apollo 1240 | |
Wizard Developments: Magnum 1240 |
Anschluss: Trapdoor Slot (A1200) |
Apollo 1240, 040@28Mhz
Apollo 1240, 040@28Mhz, rear (heatsink and fan missing)
HiRes Version von Bild 1 - bytes
HiRes Version von Bild 1 - bytes
Hi Res Version, Apollo 1240, 040@28Mhz - bytes
Hi Res Version, Apollo 1240, 040@28Mhz, rear (heatsink and fan missing) - bytes
HiRes Version Vorderseite - bytes
HiRes Version Rueckseite - bytes
Ebay-Preis (01 2005) 73,00EUR 040/40 incl. 48MB RAM
Ebay-Preis (02 2005) 88,75EUR 040/40 incl. 8MB RAM
Processor: | 040@25Mhz, 040@33Mhz or 040@40Mhz |
FPU: | Internal |
MMU: | Internal |
Max Ram: | 32MB (64MB with additional SIMM socket) |
Ram Type: | 1 x 72pin SIMM socket. (An additional SIMM socket can be fitted), (EDO RAM works but is not taken advantage of) |
An accelerator which plugs into the trapdoor slot of the A1200. An optional SCSI-II controller was available for this card. It is fully PCMCIA compatible and an additional SIMM socket could be fitted by the dealer, or end user if they were competent enough.
Jumpers
Jumper | OFF | ON |
---|---|---|
RAM | Turn off RAM | Turn on RAM |
SCSI | Disable SCSI Autoboot | Enable SCSI Autoboot |
Processor | 040 Installed | 060 Installed |
SCSI Jumper
The SCSI interfaces autoboot option should be turned off if there are no bootable devices or any devices at all attached to the SCSI bus. This prevents a 30 second delay while the system attempts to detect bootable SCSI devices. It is possible to upgrade this card to an 060 with an appropriate voltage regulator.
CLK Jumper
Processor | Position |
---|---|
040 @ any Mhz | Set to 040 |
060@50Mhz | Set to 060 |
060@66Mhz | Set to 040 |
Einsendungen zu dieser Seite von: Ian Stedman, RiWa & Friends, Stephan Neise |
Einem link gefolgt? Hier gehts zur Hauptseite
Followed a link? Please go to the Main Site